Ready to protect your vehicle with LUXE PPF? Follow these step-by-step instructions for a smooth and successful installation.
What You’ll Need:
- LUXE PPF Protection Film Kit
- Squeegee or soft applicator
- Spray bottle with soapy water solution
- Spray bottle with clean water
- Microfiber towels
- Utility knife or film trimmer
- Heat gun (optional, for edges and curves)
Step-by-Step Instructions:
1. Prepare Your Vehicle
- Wash your car thoroughly to remove dirt, debris, and wax.
- Dry the surface completely with a clean microfiber towel.
- Ensure you’re working in a dust-free, shaded area.
2. Prep the Surface
- Spray the area generously with a soapy water solution to help with film positioning.
3. Position the Film
- Peel the backing off the LUXE PPF film.
- Lightly spray the adhesive side of the film with the soapy water solution.
- Place the film onto the prepared surface, sliding it into final position.
4. Smooth and Secure
- Use a squeegee or soft applicator to gently press the film onto the surface.
- Start from the center and work outward to push out air bubbles and excess water.
- For edges and curves, use a heat gun on low setting to help the film conform.
5. Trim Excess Film
- Carefully trim any extra film around the edges with a utility knife or film trimmer.
6. Final Touches
- Wipe down the film with a clean, dry microfiber cloth.
- Inspect your work for remaining bubbles and gently press them out with your squeegee.
- Allow the film to set and cure for at least 24 hours before washing or exposing to harsh elements.
Tips for Best Results:
- Avoid applying film in direct sunlight or on hot surfaces.
- Take your time, precision makes perfect!
- If you are unsure or want a flawless result, consider having your LUXE PPF professionally installed.